After the ground treatment is good, we need to lay the natural floor mat on the ground first, the ground pad uses IXPE as the base material, overlying the PE film of 4 silk or 8 silk, because the geothermal environment has high requirements for the ground mat。 In order to prolong the service life of the floor, it is suggested that the 8 silk film should be selected and the ordinary pearl cotton moistureproof mat should not be used, because Jane is not used。 Moistureproof cushion made of bead cotton is not specially designed for geothermal environment。 The floor heating pad has a self sealing adhesive tape on the one hand, and a membrane on the other side。 The film is covered on the self sealing adhesive tape (that is, the PE film is installed upward)。 The ground warm ground mat can be used in all kinds of warm environment, but it is not allowed to contact the electric heating plate directly。 The temperature of the object directly contact with the ground mat is not recommended over 60 degrees C, and the ground pad will become softer than the ground pad。
If the customer demands a higher foot feeling, we can paving a layer of natural cork ground mat on the basis of the ground warm ground, and the cork ground pad is environmentally sound and healthy, with the function of silence and shock. The product is divided into two kinds of domestic and imported (imported cork ground mats with soy glue as adhesive, no aldehyde products), and the floor sense of the floor after installation. There will be a significant improvement. Cork floor mat is not afraid of high temperature, and can be used in pavement environment with high geothermal temperature.